power-over-ethernet assigned-class
Syntax
power-over-ethernet assigned-class {3 | 4 | 6}
no power-over-ethernet assigned-class
Description
Limit PoE power based on the assigned class. When an user assigns a maximum class to an interface, the PSE will limit the maximum power delivered to the PD up to a total power draw not exceeding the PSE assigned-class power. Power demotion occurs when a PD requested class is higher than the PSE assigned class, permitting the PD to receive power and operate in a reduced power mode. The default assigned class is 6 for 2-pair capable PSE and 6 for 4-pair capable PSE.
The
no
form of this command resets the action to default.
Command context
config-if
Authority
Administrators or local user group members with execution rights for this command.
Examples
On the 6400 Switch Series, interface identification differs.
Setting PoE assigned class:
switch(config)# interface 1/1/1 switch(config-if)# power-over-ethernet assigned-class 4
Resetting PoE assigned class to default:
switch(config-if)# no power-over-ethernet assigned-class 4