spanning-tree link-type
Syntax
spanning-tree link-type {point-to-point|shared}
Description
Specifies the link type of the interface, which is normally derived from the duplex setting of the port. The default setting depends on the duplex mode of the port: full-duplex ports are point-to-point, half-duplex ports are shared.
Command context
config-if
Parameters
point-to-point
Specifies the link type as point-to-point.
shared
Specifies the link type as shared.
Authority
Administrators or local user group members with execution rights for this command.
Examples
On the 6400 Switch Series, interface identification differs.
Setting the link type to point-to-point on interface 1/1/1:
switch(config)# interface 1/1/1 switch(config-if)# spanning-tree link-type point-to-point
Setting the link type to shared on interface 1/1/1:
switch(config)# interface 1/1/1 switch(config-if)# spanning-tree link-type shared