show vlan port

Syntax

show vlan port <INTERFACE-ID> [vsx-peer]

Description

Displays the VLANs configured for a specific layer 2 interface.

Command context

Manager (#)

Parameters

<INTERFACE-ID>

Specifies an interface ID. Format: member/slot/port.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

On the 6400 Switch Series, interface identification differs.

Displaying the VLANs configured on interface 1/1/3:

switch# show vlan port 1/1/3
------------------------------------------------------
VLAN  Name                            Mode
------------------------------------------------------
1     DEFAULT_VLAN_1                  native-untagged
2     UserVLAN1                       trunk
3     UserVLAN2                       trunk
5     UserVLAN3                       trunk
10    TestNetwork                     trunk
11    VLAN11                          trunk
12    VLAN12                          trunk
13    VLAN13                          trunk
14    VLAN14                          trunk
20    ManagementVLAN                  trunk