`show mvrp config`

Syntax

show mvrp config [<PORT-NUM> | <PORT-LIST> | LAG <LAG-NUM>] [vsx-peer]

Description

Displays the MVRP configuration for all L2 ports or optionally for the ports specified.

Command context

Operator (>) or Manager (#)

Parameters

<PORT-NUM>: Specifies displaying information for a particular port number.
<PORT-LIST>: Specifies displaying information for a list of ports.
LAG <LAG-NUM>: Specifies displaying information by LAG. Range: 1 to 128.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

switch# show mvrp config
Configuration and Status - MVRP
Global MVRP status : Disabled
Port    Status    Registration Join  Leave  LeaveAll Periodic
                  Type         Timer Timer  Timer    Timer
------- -------- --------      -----  ----- ------   --------
1/1/1    Disabled  Normal         20   300   1000     100
1/1/2    Disabled  Normal         20   300   1000     100
1/1/3    Disabled  Normal         20   300   1000     100