vsx-sync vrf
Syntax
vsx-sync vrf
no vsx-sync vrf
Description
Enables VSX synchronization of VRF configurations on the primary VSX node to the secondary peer switch.
To synchronize VRF configurations, there is no need to configure the same VRF on the secondary peer.
To synchronize VRF configurations associated with a particular L3 interface, no special or extra configuration is required on the primary VSX node.
The
no
form of this command disables syncing VRF configurations to the secondary peer, but it does not remove the previously synced configurations from the secondary peer.
Command context
config-vsx
Authority
Administrators or local user group members with execution rights for this command.
Examples
Enabling VSX sync for the VRF configurations to the secondary peer:
switch(config)# vrf finance switch(config-vrf)# rd 5:15 switch(config-vrf)# address-family ipv4 unicast switch(config-vrf-ipv4-uc)# route-target import 4:8 switch(config-vrf-ipv4-uc)# route-target export 4:9 switch(config-vrf-ipv4-uc)# route-target both 4:10 switch(config-vrf-ipv4-uc)# exit-address-family switch(config-vrf)# address-family ipv6 unicast switch(config-vrf-ipv6-uc)# route-target import 6:8 switch(config-vrf-ipv6-uc)# route-target export 6:9 switch(config-vrf-ipv6-uc)# route-target both 6:10 switch(config-vrf-ipv6-uc)# exit-address-family switch(config)# interface 1/1/1 switch(config-if)# vrf attach finance switch(config)# vsx switch(config-vsx)# vsx-sync vrf
Disabling VSX sync for the VRF configurations to the secondary peer:
switch(config)# vsx switch(config-vsx)# no vsx-sync vrf