show ipv6 mroute brief

Syntax

show ipv6 mroute brief [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows brief version of the multicast routing information. Optionally, you can specify the display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing the IPv6 mroute brief:

switch# show ipv6 mroute brief all-vrfs
IP Multicast Route Entries

VRF : blu
Total number of entries : 2

Group Address  : ff08::1:3
Source Address : 2002::04
Neighbor       : 2003::04
Interface       : 1/1/2

Group Address  : ff08::1:4
Source Address : 2002::03
Neighbor       : 2003::05
Interface       : 1/1/3

VRF : default
Total number of entries : 1

Group Address  : ff08::1:5
Source Address : 2001::03
Neighbor       : 2002::01
Interface       : 1/1/1