show ipv6 source-interface

Syntax

show ipv6 source-interface {sflow |  tftp |  radius | tacacs | all} 
     [vrf <VRF-NAME>] [vsx-peer]

Description

Shows single source IP address configuration settings.

Command context

Manager (#)

Parameters

sflow | tftp | radius | tacacs | all

Shows single source IP address configuration settings for a specific protocol. The all option shows the global setting that applies to all protocols that do not have an address set.

vrf <VRF-NAME>

Specifies the name of a VRF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Administrators or local user group members with execution rights for this command.

Examples

On the 6400 Switch Series, interface identification differs.

Showing single source IP address configuration settings for sFlow:

switch# show ipv6 source-interface sflow

Source-interface Configuration Information
----------------------------------------
Protocol        Source Interface
--------        ----------------
 sflow            2001:DB8::1

Showing single source IP address configuration settings for all protocols:

switch# show ipv6 source-interface all

Source-interface Configuration Information
----------------------------------------
Protocol        Source Interface
--------        ----------------
 all             1/1/1