show mvrp state
Syntax
show mvrp state [<VLAN-ID> | <VLAN-ID> <PORT-NUM>]
[vsx-peer]
Description
Displays the MVRP Registrar and Applicant state machine information for all ports on which MVRP is enabled, or for specific ports.
Command context
Operator (>
) or Manager (#
)
Parameters
<VLAN-ID>
<PORT-NUM>
Specifies a physical port on the switch. Forrmat:
member/slot/port
.[vsx-peer]
Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
On the 6400 Switch Series, interface identification differs.
switch# show mvrp state 1 Configuration and Status - MVRP state for VLAN 1 Port VLAN Registrar Applicant State State ---- ---- -------- --------- 1/1/1 1 MT QA
switch# show mvrp state 10 1/1/1 Configuration and Status - MVRP state for VLAN 10 Port VLAN Registrar Applicant Forbid State State Mode ---- ---- --------- --------- --------- 1/1/1 10 MT LO Yes switch#