`show lacp aggregates`

Syntax

show lacp aggregates [<LAG-NAME>] [vsx-peer]

Description

Displays a specified LAG or all configured LAGs along with VSX LAGs.

Command context

Operator (>) or Manager (#)

Parameters

<LAG-NAME>: Specifies the LAG name. Optional. Syntax: string
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Displaying all configured LAGs along with VSX LAGs:

switch# show lacp aggregates

Aggregate name   : lag100 (multi-chassis)
Interfaces       : 1/1/44
Peer interfaces  : 1/1/44
Heartbeat rate   : Slow
Hash             : l3-src-dst
Aggregate mode   : Active

Displaying a specified LAG:

switch# show lacp aggregates lag100

Aggregate name   : lag100 (multi-chassis)
Interfaces       : 1/1/44
Peer interfaces  : 1/1/44
Heartbeat rate   : Slow
Hash             : l3-src-dst
Aggregate mode   : Active