neighbor route-map

Syntax

neighbor {<IP-ADDRESS>|<PEER-GROUP-NAME>} route-map <MAP-NAME> {in|out}

no neighbor {<IP-ADDRESS>|<PEER-GROUP-NAME>} route-map <MAP-NAME> {in|out}

Description

This command applies a route map to incoming or outgoing routes. It configures the route map for modifying the default attributes of the route.

NOTE:

A peer group configuration for outbound route map will override the configuration of the neighbor.

The no form of this command removes a route map.

Command context

config-bgp-ipv4-uc

or

config-bgp-ipv6-uc

Parameters

<IP-ADDRESS>

Specifies an IP address.

<PEER-GROUP-NAME>

Specifies a peer group.

<MAP-NAME>

Specifies the name of the route map.

in|out

Sets the route map policy to apply to either the received routes from the neighbor (in) or the advertised routes to the neighbor (out).

Authority

Administrators or local user group members with execution rights for this command.

Examples

switch(config-bgp-ipv4-uc)# neighbor 1.1.1.1 route-map HPE in
switch(config-bgp-ipv4-uc)# no neighbor 1.1.1.1 route-map HPE in
switch(config-bgp-ipv4-uc)# neighbor PG route-map HPE in
switch(config-bgp-ipv4-uc)# no neighbor PG route-map HPE in
switch(config)# route-map Rmap permit seq 10

switch(config-route-map-Rmap-10)# match metric 100

switch(config-route-map-bgp-10)# router bgp 100

switch(config-bgp-ipv4-uc)# neighbor 1.1.1.1 remote-as 100

switch(config-bgp-ipv4-uc)# neighbor 1.1.1.1 route-map Rmap out