vsx-sync neighbor
Syntax
vsx-sync neighbor
no vsx-sync neighbor
Description
Enables VSX synchronization of IPv4 and IPv6 static neighbors configuration on primary VSX node to the secondary peer. There is no configuration sync from secondary to primary peer. If any new modification or additional configuration is made on the primary node for IPv4 and IPv6 static neighbors configuration, they will be auto-synced.
The
no
form of this command VSX synchronization of IPv4 and IPv6 static neighbors configurations to the secondary peer, but it does not remove the previously synced configurations from the secondary peer switch.
Command context
config-vsx
Authority
Administrators or local user group members with execution rights for this command.
Examples
Enabling VSX sync for the IPv4 and IPv6 static neighbors configurations:
DUT-1 (config-vsx)# show run in vlan127 interface vlan127 ip address 137.1.1.1/16 ipv6 address 7f00::1/64 arp ipv4 137.1.1.35 mac 00:12:01:00:00:1a arp ipv4 137.1.1.70 mac 00:12:01:00:00:3d exit DUT-1(config-vsx) switch(config)# vsx switch(config-vsx)# vsx-sync neighbor
Disabling VSX sync for the IPv4 and IPv6 static neighbors configurations:
switch(config)# vsx switch(config-vsx)# no vsx-sync neighbor