destination ipv6

Syntax

destination ipv6 <IPVv6-ADDR>

no destination ipv6 <IPV6-ADDR>

Description

Sets the destination IPv6 address for an IP tunnel. Specify the address of the interface on the remote device to which the tunnel will be established.

The no form of this command deletes the destination IPv6 address from an IP tunnel.

Command context

config-ip-if

Parameters

<IPV6-ADDR>

Specifies the tunnel IP address in IPv6 format (xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx), where x is a hexadecimal number from 0 to F.

Authority

Administrators or local user group members with execution rights for this command.

Examples

Defines the destination IPv6 address to be 2001:DB8::1 for IPv6 in IPv6 tunnel .

switch(config)# interface tunnel 8 mode ip 6in6
switch(config-ip-if)# destination ipv6 2001:DB8::1

Deletes the destination IPv6 address 2001:DB8::1 from IPv6 in IPv6 tunnel 8.

switch(config)# interface tunnel 8
 switch(config-ip-if)# no destination ipv6 2001:DB8::1