vtep-peer

Syntax

vtep-peer <IPV4-ADDR>

no vtep-peer <IPV4-ADDR>

Description

Adds a VTEP peer to a VNI. The VTEP peer IP address must be reachable for a VXLAN tunnel to be established.

The no form of this command removes a VTEP peer from a VNI, which deletes the VXLAN tunnel to the peer.

Command context

config-vni

Parameters

<IPV4-ADDR>

Specifies the IP address of a VTEP peer in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255. You can remove leading zeros. For example, the address 192.169.005.100 becomes 192.168.5.100.

Authority

Administrators or local user group members with execution rights for this command.

Examples

Adding VTEP peer 10.10.10.1 to VNI 1000: 

switch(config)# int vxlan 1
switch(config-vxlan-if)# vni 1000
switch(config-vni)# vlan 10
switch(config-vni)# vtep-peer 10.10.10.1

Deleting VTEP peer 10.10.10.1 from VNI 1000: 

switch(config)# int vxlan 1
switch(config-vxlan-if)# vni 1000
switch(config-vni)# no vtep-peer 10.10.10.1