range

Syntax

range <LOW-IPV4-ADDR> <HIGH-IPV4-ADDR> [prefix-len <MASK>]

no range <LOW-IPV4-ADDR> <HIGH-IPV4-ADDR> [prefix-len <MASK>]

Description

Defines the range of IP addresses supported by the current DHCPv4 server pool. A maximum of 64 ranges are supported per switch across all VRFs.

The no form of this command deletes the address range for the current pool.

Command context

config-dhcp-server-pool

Parameters

<LOW-IPV4-ADDR>

Specifies the lowest IP address in the pool in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255.

<HIGH-IPV4-ADDR>

Specifies the highest IP address in the pool in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255.

prefix-len <MASK>

Specifies the number of bits in the address mask in CIDR format (x), where x is a decimal number from 0 to 32.

NOTE:

When active gateway is configured on the interface serviced by the pool, you must specify a prefix length that matches the mask on the IP address assigned to the interface. Otherwise, client stations will get a prefix length from active gateway that may not be consistent with the configured range, and a DHCP error will occur. In the following example, the DHCP range prefix is set to 16 to match the mask on the IP address assigned to interface VLAN 2.

switch(config)# interface vlan 2
switch(config-if-vlan)# ip address 200.1.1.1/16
switch(config-if-vlan)# active-gateway ip 200.1.1.3 mac 00:aa:aa:aa:aa:aa
switch(config-if-vlan)# exit
switch(config)# dhcp-server vrf primary
switch(config-dhcp-server)# pool primary-pool
switch(config-dhcp-server-pool)# range 192.168.1.1 192.168.1.100 prefix-len 16

Authority

Administrators or local user group members with execution rights for this command.

Example

Defines the address range 192.168.1.1 to 192.168.1.100 with a mask of 24 bits for the DHCPv4 server pool primary-pool on VRF primary.

switch(config)# dhcp-server vrf primary
switch(config-dhcp-server)# pool primary-pool
switch(config-dhcp-server-pool)# 192.168.1.1 192.168.1.100 prefix-len 24

Deletes the address range 192.168.1.1 to 192.168.1.100 with a mask of 24 bits from the DHCPv4 server pool primary-pool on VRF primary.

switch(config)# dhcp-server vrf primary
switch(config-dhcp-server)# pool primary-pool
switch(config-dhcp-server-pool)# no 192.168.1.1 192.168.1.100 prefix-len 24