`show resources`

Syntax

show resources [vsx-peer]

Description

Shows hardware resource consumption on the switch. Resource data is updated every 10 seconds.

Hardware resource consumption information is shown for:

TCAM entries
Policers
L4 Port Ranges

Command context

Operator (>) or Manager (#)

Parameters

[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing hardware resource consumption:

switch# show resources

Resource Usage:

Mod  Description
         Resource                          Width    Used Reserved    Free
-------------------------------------------------------------------------
1/1  Ingress IPv4 Port ACL
         Ingress TCAM Entries                  1       2     2048
     Ingress MAC+IPv4 Port Policy
         Ingress TCAM Entries                  2       8     2048
     Ingress Control Plane Policing
         Ingress TCAM Entries                  2     152     1024
     Egress Control Plane Policing
         Egress TCAM Entries                   2      84      256
     Total
         Ingress TCAM Entries                        162     5120   11264
         Egress TCAM Entries                          84      256     768
         Policers                                      0            16384
         Ingress L4 Port Ranges                        0               32