manager ip
Syntax
manager ip <IPV4-ADDR>
no manager ip
Description
Configures the IP address of the HSC manager. The switch can connect with up to three managers.
The
no
form of this command deletes the IP address of the HSC manager.
NOTE:
HSC configuration can only be modified when the HSC is disabled.
Command context
config-hsc
Parameters
<IPV4-ADDR>
Specifies the IP address of the HSC manager in IPv4 format (
x.x.x.x
), wherex
is a decimal number from 0 to 255. You can remove leading zeros. For example, the address192.169.005.100
becomes192.168.5.100
. The IP address must be reachable on the management VRF.
Authority
Administrators
Examples
Configuring the IP address of the HSC manager:
switch(config)# hsc switch(config-hsc)# manager ip 1.1.1.1
Deleting the HSC manager IP address:
switch(config)# hsc switch(config-hsc)# disable switch(config-hsc)# no manager ip