show arp timeout

Syntax

show arp timeout [<INTERFACE>][vsx-peer]

Description

Shows the age-out period for each ARP (Address Resolution Protocol) entry for a port, LAG, or VLAN interface.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE>

Specifies a physical port, VLAN, or LAG on the switch. Some switches (such as the Aruba 8400 Switch Series), use the format member/slot/port (for example, 1/1/1). You can also use slot/port (for example, 1/1).

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Showing ARP timeout information for a VLAN:

switch# show arp timeout vlan4

Showing ARP timeout information for a port:

switch# show arp timeout 1/1/1
ARP Timeout:

------------------

Port             VRF                              Timeout

1/1/1            default                          600