Firmware Update page

From the Firmware Update page, you can see the current, primary, and secondary firmware versions and you can upload firmware files.

Firmware Update showing image versions

Uploads are performed through the REST interface.

IMPORTANT:

After the update starts, it cannot be canceled.

Prior to updating, a message is displayed: Are you sure you want to update the primary/secondary image?

After the firmware upload is completed, a new dialog box is displayed that contains the message: New firmware has been successfully uploaded. Verifying and writing system firmware...

You may need to press Reboot on the page or select the Reboot item in the top right System menu for the image to take effect.

Selecting Reboot reboots the switch.

IMPORTANT:

After you select Reboot, you cannot cancel the request.

After selecting Reboot, you will be prompted to verify that you want to reboot the switch and to choose an image to use when rebooting.

For example:

Reboot confirmation dialog box