PIM events
The following are the events related to PIM.
Event ID: 5101
| Message | Failed to send <pkt_type> packet on Interface <InterfaceName> |
| Category | PIM |
| Severity | Error |
| Description | Send error packet |
Event ID: 5102
| Message | I/F configured with IP <ip0>.<ip1>.<ip2>.<ip3> on Interface <InterfaceName> |
| Category | PIM |
| Severity | Information |
| Description | pim IP config |
Event ID: 5103
| Message | Packet dropped from <ip0>.<ip1>.<ip2>.<ip3> <error>, VID <vid> |
| Category | PIM |
| Severity | Error |
| Description | Packet dropped |
Event ID: 5104
| Message | Received packet from router <ip0>.<ip1>.<ip2>.<ip3>, unkwn pkt type <pkt_type> |
| Category | PIM |
| Severity | Error |
| Description | Received packet from router |
Event ID: 5105
| Message | Failed to add flow <dip0>.<dip1>.<dip2>.<dip3>, <sip0>.<sip1>.<sip2>.<sip3> (<status> <srcport> <srcvid> <totalvid> <flowtype> <callerid>) |
| Category | PIM |
| Severity | Error |
| Description | Failed to add flow |
Event ID: 5106
| Message | Failed to remove flow g <dip0>.<dip1>.<dip2>.<dip3>, s <sip0>, <sip1>.<sip2>.<sip3> (<status> <srcport> <srcvid> <flowtype> <callerid>) |
| Category | PIM |
| Severity | Error |
| Description | Failed to remove flow for Hardware |
Event ID: 5107
| Message | Failed to add a mroute for s=<source>, g=<group> on interface <interfaceName> as the configured mroute limits are reached |
| Category | PIM |
| Severity | Information |
| Description | Failed to program mroute as the limits are reached |
Event ID: 5108
| Message | Failed to add a mroute for s=<source>, g=<group> on interface <interfaceName> as the configured sources per group limit is reached |
| Category | PIM |
| Severity | Information |
| Description | Failed to program mroute as the sources per group limit is reached |