show radius-server secure ipsec

Syntax

show radius-server secure ipsec { server-list | host {<FQDN> | <IPV4> |  <IPv6>}
                                [port <PORT-NUMBER>] [vrf <VRF-NAME>] [vsx-peer] }

Description

Shows information for one or all RADIUS servers configured with IPsec.

Command context

Operator (>) or Manager (#)

Parameters

server-list

Selects all servers for showing.

host {<FQDN> | <IPV4> | <IPv6>}
Specifies the RADIUS server as:
  • <FQDN>: a fully qualified domain name.
  • <IPV4>: an IPv4 address.

  • <IPV6>: an IPv6 address.

port <PORT-NUMBER>

Specifies the UDP authentication port number. Range: 1 to 65535. Default: 1812.

vrf <VRF-NAME>

Specifies the VRF name to be used for communicating with the server. If no VRF name is provided, the default VRF named default is used.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Usage

The IPsec key is shown in an exportable ciphertext format.

Examples

Showing information for RADIUS server 1.1.1.1 secured with IPsec:

switch# show radius-server secure ipsec host 1.1.1.1
IPsec                    : enabled
Protocol                 : ESP
Authentication           : MD5
Encryption               : AES
SPI                      : 1234

Showing information for all RADIUS servers secured with IPsec:

switch# show radius-server secure ipsec server-list
Server                   : 1.1.1.1
IPsec                    : enabled
Protocol                 : ESP
Authentication           : MD5
Encryption               : AES
SPI                      : 1234

Server                   : 1.1.1.2
IPsec                    : enabled
Protocol                 : ESP
Authentication           : MD5
Encryption               : AES
SPI                      : 12341