neighbor timers

Syntax

neighbor {<IP-ADDRESS>|<PEER-GROUP-NAME>} timers <KEEPALIVE> <HOLDTIME>

no neighbor {<IP-ADDRESS>|<PEER-GROUP-NAME>} timers <KEEPALIVE> <HOLDTIME>

Description

This command sets the timers for a specific BGP neighbor or peer group. When the timer is applied to peer-group then all the neighbors that are part of peer-group will inherit the value configured.

The neighbor connection must be reset using clear ip bgp <NEIGHBOR-IP-ADDRESS> to allow this configuration to take effect.

The no form of this command clears the timers for a specific BGP neighbor or peer group.

Command context

config-bgp

Parameters

<IP-ADDRESS>

Specifies an IP address.

<PEER-GROUP-NAME>

Specifies a peer group.

<KEEPALIVE>

Specifies the Keep-Alive timer value for the neighbor. Default: 60 seconds. Range: 0-65535.

<HOLDTIME>

Specifies the Hold-timer value. Default: 180 seconds. Range: 0-65535.

Authority

Administrators

Examples

switch(config-bgp)# neighbor 1.1.1.1 timers 120 360
switch(config-bgp)# no neighbor 1.1.1.1 timers
switch(config-bgp)# neighbor pg timers 120 360
switch(config-bgp)# no neighbor pg timers