Port LEDs

Port LEDs for the Aruba 8325-48Y8C (JL624A and JL625A)
  LED
1 Upper SFP28 port LED
2 Middle SFP28 port LED
3 Lower SFP28 port LED
4 QSFP28 port LED and lane 1 indicator
5 QSFP28 lane 2 LED
6 QSFP28 lane 3 LED
7 QSFP28 lane 4 LED
8 Out-of-band management port Link LED
9 Out-of-band management port Act (activity) LED
Port LED behavior for the Aruba 8325-48Y8C (JL624A and JL625A)
Chassis LEDs Function State Meaning
SFP28 port LEDs To display link and activity information for the port. On/flashing green Shows a valid link at 25/10 Gbps.

  • Fast flashing1 indicates port activity at 25 Gbps.

  • Slow flashing2 indicates port activity at 10 Gbps.

Flashing amber When the Global Status LED is simultaneously flashing amber, indicates port-speed mismatch, an incompatible, unsupported, faulty transceiver, or a port failure.
Off Port is disabled, not connected, or not receiving a link beat signal.
QSFP28 port LEDs To display link and activity information for the port. On/flashing green Shows a valid link at 100/40 Gbps.

  • Fast flashing3 indicates port activity at 100 Gbps.

  • Slow flashing4 indicates port activity at 40 Gbps.

Flashing amber When the Global Status LED is simultaneously flashing amber with the Lane 1 LED, indicates an unsupported or faulty transceiver, or a port failure.
Off

Port is disabled, not connected, or not receiving a link beat signal.

Lanes 2-4 are always off and are currently unused by HPE-Aruba software.

Management port Link LED To display link information for the port. On green Shows a valid link.
Off Port is disabled, not connected, or not receiving a link beat signal.
Management port Act LED To display activity information for the port. Flashing yellow Flashing indicates port activity.
1

The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.

2

The slow flashing behavior is an on/off cycle once every 1.6 seconds, approximately.

3

The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.

4

The slow flashing behavior is an on/off cycle once every 1.6 seconds, approximately.

Port LEDs for the Aruba 8325-32C (JL626A and JL627A)
  LED
1 QSFP28 port LED and lane 1 indicator
2 QSFP28 lane 2 LED (Not supported with currently released software.)
3 QSFP28 lane 3 LED (Not supported with currently released software.)
4 QSFP28 lane 4 LED (Not supported with currently released software.)
5 Unused
6 Out-of-band management port Link and Activity LED
Port LED behavior for the Aruba 8325-32C (JL626A and JL627A)
Chassis LEDs Function State Meaning
QSFP28 port LEDs To display link and activity information for the port. On/flashing green Shows a valid link at 100/40 Gbps.

  • Fast flashing1 indicates port activity at 100 Gbps.

  • Slow flashing2 indicates port activity at 40 Gbps.

Flashing amber When the Global Status LED is simultaneously flashing amber with the Lane 1 LED, indicates an unsupported or faulty transceiver, or a port failure.
Off

Port is disabled, not connected, or not receiving a link beat signal.

Lanes 2-4 are always off and are currently unused by HPE-Aruba software.

Management port Link LED To display link information for the port. On green Shows a valid link.
Off Port is disabled, not connected, or not receiving a link beat signal.
Management port Act LED To display activity information for the port. Flashing yellow Flashing indicates port activity.
1

The fast flashing behavior is an on/off cycle once every 0.8 seconds, approximately.

2

The slow flashing behavior is an on/off cycle once every 1.6 seconds, approximately.