`show bgp neighbor paths`

Syntax

show bgp [vrf <VRF-NAME>] {ipv4 unicast | ipv6 unicast 
     | all} neighbors <IP-ADDRESS> paths [vsx-peer]

show bgp l2vpn evpn neighbors <IP-ADDRESS> paths

Description

Shows autonomous system paths learned from the specified neighbor.

Command context

Operator (>) or Manager (#)

Parameters

vrf <VRF-NAME>: Shows the information for a specified VRF.
ipv4 unicast: Shows the information for an IPv4 unicast address family.
ipv6 unicast: Shows the information for an IPv6 unicast address family.
all: Shows the information for all address families and subaddress families.
<IP-ADDRESS>: Shows the information for a neighbor IP address.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.
l2vpn evpn: Shows the information for L2VPN EVPN address family. This parameter applies only to 8325 series switches.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Showing autonomous system paths learned from the specified IPv4 unicast neighbor:

switch# show bgp ipv4 unicast neighbors 192.168.12.2 paths
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
              i internal, e external S Stale, R Removed
VRF : default
Local Router-ID 9.0.0.1

    Network            Nexthop          Path
--------------------------------------------
*>e 9.0.0.0/24         9.0.0.2          200 65534.65535 3.4 18.54934 3574.8570 5.6
*>e 100.0.0.0/24       9.0.0.2          200
*>e 100.0.1.0/24       9.0.0.2          200
*>e 100.0.2.0/24       9.0.0.2          200
*>e 100.0.3.0/24       9.0.0.2          200
Total number of entries 5

Showing autonomous system paths learned from the specified L2VPN EVPN neighbor:

switch# show bgp l2vpn evpn neighbors 192.168.12.1 paths

Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
              i internal, e external S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
EVPN Route-Type 2 prefix: [2]:[ESI]:[EthTag]:[MAC]:[OrigIP]
EVPN Route-Type 3 prefix: [3]:[EthTag]:[OrigIP]

VRF : default
Local Router-ID 9.0.0.2

     Network                                            Nexthop         Path
-----------------------------------------------------------------------------------
Route Distinguisher: 10.1.1.54:32967    (L2VNI 30000)
*>   [2]:[0]:[0]:[00:06:f6:3f:e3:c1]:[]                 1.1.1.20         100
*>   [2]:[0]:[0]:[8c:60:4f:f2:f5:41]:[]                 1.1.1.10         100
Total number of entries 2