area <AREA-ID> nssa

Syntax

area <AREA-ID> nssa [no-summary]

no area <AREA-ID> nssa [no-summary]

Description

Creates the NSSA area (Not So Stubby Area) with <AREA-ID> if not present. If area is present and not NSSA area, this command changes the area type to NSSA area. If no-summary is used, area type will be NSSA No-Summary.

The no form of this command unsets the area type as NSSA. That is, the configured area will be changed to default normal area. The no area <AREA-ID> nssa no-summary command enables sending inter-area routes into NSSA, but will not unset the area as NSSA.

Command context

config-ospf

Parameters

<AREA-ID>
Specifies the area ID in one of the following formats.
  • OSPF area identifier in IPv4 address format. Format: A.B.C.D

  • OSPF area identifier in decimal format. Range: 0-4294967295.

nssa [no-summary]

Specifies Not So Stubby Area (NSSA) area type. If area is present and not NSSA area, parameter changes the area type to NSSA area. If no-summary is specified, area type will be NSSA No-Summary, which means do not inject inter-area routes into NSSA.

Authority

Administrators

Examples

Creating an NSSA area for OSPFv3:

switch(config)# router ospfv3 1
switch(config-ospfv3-1)# area 1 nssa
switch(config-ospfv3-1)# area 1 nssa no-summary

Unsetting the area as NSSA for OSPFv3:

switch(config)# router ospfv3 1
switch(config-ospfv3-1)# no area 1 nssa
switch(config-ospfv3-1)# no area 1 nssa no-summary