show dhcp-relay bootp-gateway

Syntax

show dhcp-relay bootp-gateway [interface <INTERFACE-NAME>] [vsx-peer]

Description

Shows the bootp gateway defined for all interfaces or a specific interface.

Command context

Manager (#)

Parameters

<INTERFACE-NAME>

Specifies the name of the interface on the switch. Some switches (such as the Aruba 8400 Switch Series), use the format member/slot/port (for example, 1/1/1). Other switches, use slot/port (for example, 1/1).

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

switch# show dhcp-relay bootp-gateway

 BOOTP Gateway Entries

 Interface            Source IP
 -------------------- ---------------
 1/1/1                1.1.1.1
 1/1/2                1.1.1.2
switch# show ip helper-address interface 1/1/1

 BOOTP Gateway Entries

 Interface            Source IP
 -------------------- ---------------
 1/1/1                1.1.1.1