show arp vrf

Syntax

show arp {all-vrfs | vrf <VRF-NAME>} [vsx-peer]

Description

Shows the ARP (Address Resolution Protocol) table for all VRF (Virtual Router Forwarding) instances, or for the named VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows the ARP tables for all VRFs.

vrf <VRF-NAME>

Shows the ARP table for the specified VRF. VRF length allows up to 32 alphanumeric characters.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

switch# show arp vrf test
ARP IPv4 Entries:
-------------------------------------------------------
IPv4 Address    MAC                Port    Physical Port  State      VRF
10.20.30.40     00:50:56:bd:6a:c5  1/1/29  1/1/29         reachable  test
-------------------------------------------------------
Total Number Of ARP Entries Listed: 1.
-------------------------------------------------------

switch# show arp all-vrfs
ARP IPv4 Entries:
-------------------------------------------------------
IPv4 Address    MAC                Port    Physical Port  State      VRF
192.168.120.10  00:50:56:bd:10:be  1/1/32  1/1/32         reachable  red
10.20.30.40     00:50:56:bd:6a:c5  1/1/29  1/1/29         reachable  test
-------------------------------------------------------
Total Number Of ARP Entries Listed: 2.
-------------------------------------------------------