enable
Syntax
enable
Description
Enables the mirroring session specified by the current command context.
Command context
config-mirror-<SESSION-ID>
Authority
Administrators
Usage
By default, mirroring sessions are disabled.
When a mirroring session is enabled, the
show mirror
command for that session ID shows an
Admin Status
of
enable
and an
Operation Status
of
enabled
.
If sFlow is enabled on a port and a mirroring session specifies the same port as a source of received traffic (the source is configured with a direction of
rx
or
both
):
The attempt to enable the mirroring session fails and an error is returned.
When adding, removing, or changing the configuration of a source port in an enabled mirroring session, packets from other mirror sources using the same destination port might be interrupted.
Example
Configuring and enabling a mirroring session:
switch(config)# mirror session 3 switch(config-mirror-3)# source interface 1/1/2 rx switch(config-mirror-3)# destination interface 1/1/3 switch(config-mirror-3)# comment Monitor router port ingress-only traffic switch(config-mirror-3)# enable