tcp-connect
Syntax
tcp-connect {<DEST-IPV4-ADDR> | <HOSTNAME>} <PORT-NUM>[source {<SOURCE-IPV4-ADDR> |
<IFNAME>} [source-port <PORT-NUM>]] [name-server <IPV4-ADDR-DNS-SERVER>]
[probe-interval <PROBE-INTERVAL>]
Description
Configures TCP connect as the IP-SLA test mechanism. Requires destination address/hostname and destination port for the IP-SLA of tcp-connect IP-SLA type.
Command context
config-ip-sla-<IP-SLA-NAME>
Parameters
{<DEST-IPV4-ADDR> | <HOSTNAME>}
Selects the destination IPv4 address for the IP-SLA or the hostname of the destination.
<PORT-NUM>
Destination port for the IP-SLA. Range: 1 to 65535.
[source {<SOURCE-IPV4-ADDR> | <IFNAME>}]
Selects the source IPv4 address for SLA probes or the source interface to use for sending IP-SLA probes.
- [
source-port <PORT-NUM>
] Specifies the port for the IP-SLA test.
- [
name-server <IPV4-ADDR-DNS-SERVER>
] Specifies the DNS server for destination hostname resolution.
- [
probe-interval <PROBE-INTERVAL>
] Probe interval in seconds. Range: 30 to 604800.
Authority
Administrators
Examples
switch(config-ipsla-1)# tcp-connect 2.2.2.2 8080 switch(config-ipsla-1)# tcp-connect 2.2.2.2 8080 source 2.2.2.1 source-port 6000 switch(config-ipsla-1)# tcp-connect 2.2.2.2 8080 source 1/1/1 source-port 6000 switch(config-ipsla-1)# tcp-connect https://device.arubanetworks.com 8080 switch(config-ipsla-1)# tcp-connect https://device.arubanetworks.com 8080 source 2.2.2.1 source-port 6000 switch(config-ipsla-1)# tcp-connect https://device.arubanetworks.com 8080 source 1/1/1 source-port 6000 switch(config-ipsla-1)# tcp-connect https://device.arubanetworks.com 8080 name-server 10.10.10.2