ip-sla responder

Syntax

ip-sla responder <SLA-NAME> {udp-echo | tcp-connect | udp-jitter-voip} <PORT-NUM>
     [source {<SOURCE-IPV4-ADDR> | <IFNAME>}][vrf VRF]
no ip-sla responder <SLA-NAME>

Description

Selects the IP-SLA responder. The responder can be configured for udp-echo, tcp-connect, udp-jitter-voip type. It requires the SLA name, SLA type, and port number as arguments. Source IP/interface ID is a must for type udp-jitter-voip and optional for other types.

The no form of this command removes the IP-SLA responder.

Command context

config

Parameters

<SLA-NAME>

Specifies the SLA name.

udp-echo

Enables responder for udp-echo probes.

tcp-connect

Selects TCP connect as the IP-SLA test mechanism.

udp-jitter-voip

Selects VOIP jitter as the IP-SLA test mechanism.

<PORT-NUM>

Specifies the port number to listen for IP-SLA probes. Range: 1 to 65535.

[source {<SOURCE-IPV4-ADDR> | <IFNAME>}]

Selects the source IPv4 address for SLA probes or the source interface to use for sending IP-SLA probes.

Authority

Administrators

Examples

switch(config)# ip-sla responder SLA1 udp-echo 8000 source 2.2.2.2
switch(config)# ip-sla responder SLA1 udp-echo 8000 source 1/1/1
    
switch(config)# no ip-sla responder <SLA-NAME>