update

Syntax

update {primary | secondary} <IMAGE>

Description

Verifies and installs a product image. The user can select the primary or secondary boot profile to update and the location of the file.

Command context

Service OS (SVOS>)

Parameters

{primary | secondary}

Selects either the primary or secondary image.

<IMAGE>

Specifies the image name.

Authority

Administrators

Examples

Updating the software image using TFTP:
NOTE:

The OOBM port is disabled on first boot and must be enabled using the ip command.

SVOS> ip dhcp
SVOS> ip show
Interface  : Link Up
IP Address : 192.0.2.22
Subnet Mask: 255.255.200.20
Gateway    : 10.0.24.1
SVOS> tftp -g -r XL.10.00.0001.swi -l image.swi 192.4.8.10
XL.10.00.0001.swi 100% |*******************************|   178M  0:00:00 ETA
SVOS> ls
image.swi
SVOS> update primary image.swi
Updating primary software image...
Verifying image...
Done
Update the software image using USB:
NOTE:

This example assumes that the user has preloaded a USB flash drive with the image to be updated. The image name on the flash drive is not important.

SVOS> mount usb
SVOS> ls /mnt/usb
image.swi
SVOS> update primary /mnt/usb/image.swi
Updating primary software image...
Verifying image...
Done