show vsx config-consistency lacp

Syntax

show vsx config-consistency lacp [<LAG-NAME>] [vsx-peer]

Description

Displays VSX LACP configuration consistency between two VSX switches.

NOTE:

This show vsx config-consistency lacp command replaces the show mclag config-consistency lacp [<LAG-NAME>] command that is supported only in 10.00 releases.

Command context

Operator (>) or Manager (#)

Parameters

<LAG-NAME>

Specifies the LAG name. Optional. Syntax: string

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

switch# show vsx config-consistency lacp
Configurations                          Local                  Peer
------------------                      ------                 ------
Name                                    lag100                 lag100
Loop protect enabled                    false                  true
Hash scheme                             l2-src-dst-hash        l2-src-dst-hash
Qos cos override                        0                      0
Qos dscp override                       0                      0
Qos trust

VSX VLAN list
1
Peer VSX VLAN list
1,10

Configurations                          Local                  Peer
------------------                      ------                 ------
Name                                    lag111                 lag111
Loop protect enabled                    false                  false
Hash scheme                             l2-src-dst-hash        l2-src-dst-hash
Qos cos override                        0                      0
Qos dscp override                       0                      0
Qos trust
VSX VLAN list
1
Peer VSX VLAN list
1
------------------------------------------------------