ipv6 nd ra other-config-flag

Syntax

ipv6 nd ra other-config-flag

no ipv6 nd ra other-config-flag

Description

Controls the O-bit in RAs the router transmits on the current interface; but is ignored unless the M-bit is disabled in RAs. Configure to set the O-bit in RA messages for host to obtain network parameters through DHCPv6. The other-config-flag is disabled by default.

For more information on configuring the M-bit, see ipv6 nd ra managed-config-flag.

The no form of this command turns off (disables) the setting for this command in RAs.

Command context

config-if

Authority

Administrators

Usage

  • Enabling the O-bit while the M-bit is disabled directs hosts on the interface to acquire their ND configuration settings from a DHCPv6 server and their global unicast prefixes from the RA.

Examples

switch(config)# interface 1/1/1
switch(config-if)# ipv6 nd ra other-config-flag