ipv6 nd router-preference

Syntax

ipv6 nd router-preference {high | medium | low}

no ipv6 nd router-preference [high | medium | low]

Description

Specifies the value that is set in the Default Router Preference (DRP) field of Router Advertisements (RAs) that the switch sends from an interface. An interface with a DRP value of high will be preferred by other devices on the network over interfaces with an RA value of medium or low.

The no form of this command set the value to the default of medium.

Command context

config-if

Parameters

high

Sets DRP to high.

medium

Sets DRP to medium. Default.

low

Sets DRP to low.

Authority

Administrators

Examples

switch(config)# interface 1/1/1
switch(config-if)# ipv6 nd router-preference high