`show ip interface`

Syntax

show ip interface <INTERFACE-NAME>

Description

Displays the status of IP Directed Broadcast on the specified interface along with other interface related attributes.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE-NAME>: Specifies the interface to use as a source for displaying the status of the IP Directed Broadcast.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Displaying the IP Directed Broadcast status on the specified interface:

switch# show ip interface vlan30


Interface vlan30 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 94:f1:28:21:63:00
 IP MTU 1500
 IP Directed Broadcast is Enabled
 IPv4 address 192.168.3.1/24
 L3 Counters: Rx Disabled, Tx Disabled

switch# show ip interface 1/1/1

Interface 1/1/1 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 94:f1:28:21:63:00
 IP MTU 1500
 IP Directed Broadcast is Enabled
 IPv4 address 10.10.0.1/24
 L3 Counters: Rx Disabled, Tx Disabled
 Rx
          0 packets, 0 bytes
 Tx
          0 packets, 0 bytes