ipv6 mld last-member-query-interval <interval-value>

Syntax

ipv6 mld last-member-query-interval <interval-value>

Description

This command configures MLD last member query interval value in seconds. The default interval-value is 1 second.

Command context

config-if

Parameters

interval-value

Required: 1-2, configures MLD last-member-query-interval.

NOTE:

Default interval-value is 1 second. Use the no ipv6 mld last-member-query-interval command to set interval-value to the default.

Authority

Administrators

Example

switch# configure terminal
switch(config)# interface 1/1/1
switch(config-if)# ipv6 mld last-member-query-interval 2
switch(config-if)# no ipv6 mld last-member-query-interval