show ip igmp interface

Syntax

show ip igmp interface {<INTF-ID>|vlan <VLAN-ID>} [vsx-peer]

Description

Shows IGMP configuration information for a specific interface (port, VLAN, or LAG).

Command context

Operator (>) or Manager (#)

Parameters

<INTF-ID>

Specifies an interface (such as 1/1/2 or LAG10).

vlan <VLAN-ID>

Specifies a VLAN. Values: 1-4094.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Showing IGMP configuration information for interface VLAN 2:

switch# show ip igmp interface vlan 2

IGMP Configured Version  : 3
IGMP Operating Version   : 3
Querier State            : Querier
Querier IP [this switch] : 20.1.1.1
Querier Uptime           : 1m 46s
Querier Expiration Time  : 0m 1s
Snoop Enabled on VLAN    : True

Showing IGMP configuration information for interface 1/1/2:

switch# show ip igmp interface 1/1/2

IGMP Configured Version    : 3
IGMP Operating Version     : 3
Querier State              : Querier
Querier IP [this switch]   : 100.1.1.1
Querier Uptime             : 51m 44s
Querier Expiration Time    : 1m 51s