Resetting the switch admin password using the Service OS console

Perform this task only when the switch admin user password has been forgotten.

Prerequisites

You are connected to the switch through the console port.

Procedure

Reboot the switch.

At the boot prompt, select 0. Service OS Console.

0. Service OS Console
1. Primary Software Image [XL.01.01.0001]
2. Secondary Software Image [XL.01.01.0002]

At the Switch Login prompt, enter admin and press Enter. There is no password to enter.
```
Switch login: admin

Hewlett Packard Enterprise

SVOS>
```
At the SVOS> prompt, enter password and press Enter.

Enter the new password at both password prompts.

SVOS> password
Enter password: ************
Confirm password: ************ 

SVOS>

Enter boot and press Enter.

SVOS> boot

ServiceOS Information:
    Version: GT.01.01.0006
    Build Date: 2018-03-01 14:52:31 PDT
    Build ID: ServiceOS:GT.01.01.0001:461519208911:20180301452
    SHA: 46151920891195cdb2267ea6889a3c6cbc3d4193

Boot Profiles:
0. Service OS Console
1. Primary Software Image [XL.01.01.0001]
2. Secondary Software Image [XL.01.01.0001]

Select profile(primary):

To boot with the primary switch image press 1 and then Enter. To boot with the secondary switch image, press 2 and then Enter. If you make no selection for approximately 10 seconds, the switch boots the default image. The default is shown in parentheses to the right of Select profile, for example: Select profile(primary):.
Once in AOS-CX, save the configuration to make the admin login user account password setting persistent.