SNMP support and AirWave
Enable the SNMP services on the switch.
Configure the SNMP agent to use the SNMP version supported by the management station.
SNMP on the switch
The switch provides SNMP services through the management channel and the data interfaces. Functionality, such as device discovery from NMS, syslog and trap forwarding, can be any channel configured by you.
Although the SNMP server can be enabled on both VRFs (mgmt
and
default
), only one instance of SNMP can be running. The highest priority is on the
default
VRF.
For example, assume that SNMP is first enabled on the
mgmt
VRF (snmp-server vrf mgmt
). Then, SNMP is enabled on the
default
VRF (snmp-server vrf default
) without disabling SNMP on the
mgmt
(using an equivalent
no
form of the command). The
show running-config
command displays both
snmp-server vrf
commands; however, the SNMP instance is running only on the
default
VRF (highest priority).
switch# config switch(config)# snmp-server vrf mgmt switch(config)# snmp-server vrf default switch(config)# show running-config Current configuration: ! !Version ArubaOS-CX Virtual.10.01. led locator on ! ! ! snmp-server vrf default snmp-server vrf mgmt ! ...