boot fabric-module

Syntax

boot fabric-module <SLOT-ID>
 

Description

Reboots the specified fabric module.

Command context

Manager (#)

Parameters

<SLOT-ID>

Specifies the member and slot of the module. For example, to specify the module in member 1, slot 3, enter the following:

1/3

Authority

Administrators

Usage

The boot fabric-module command reboots the specified fabric module. Traffic performance is affected while the module is down.

If the specified module is the only fabric module in an up state, rebooting that module stops traffic switching between line modules and the line modules power down. The line modules power up when one fabric module returns to an up state.

This command is valid for fabric modules only.

Examples

Rebooting the fabric module in slot 1/1 when auto-confirm is not enabled:

switch# boot fabric-module 1/1
This command will reboot the specified fabric module.  Traffic performance may
be affected while the module is down.  Rebooting the last fabric module will
stop traffic switching between line modules.
Do you want to continue (y/n)? y

switch#

Rebooting the fabric module in slot 1/1 when auto-confirm is enabled:

switch# boot fabric-module 1/1
This command will reboot the specified fabric module.  Traffic performance may
be affected while the module is down.  Rebooting the last fabric module will
stop traffic switching between line modules.
Do you want to continue (y/n) y (auto-confirm)

switch#