show ipv6 ospfv3

Syntax

show ipv6 ospfv3 [<INSTANCE-TAG>] [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows OSPFv3 information including area, state, and configuration information.

Command context

Operator (>) or Manager (#)

Parameters

<INSTANCE-TAG>

Specifies an OSPFv3 Process ID optionally to show OSPFv3 information for a particular OSPFv3 process. Range: 1-63.

all-vrfs

Optionally, selects to show OSPFv3 information for all VRFs.

vrf <VRF-NAME>

Optionally, selects to show OSPFv3 information for a particular VRF. If a <VRF-NAME> is not specified, OSPFv3 information shows for the default VRF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing general OSPFv3 configurations:

switch# show ipv6 ospfv3 1
Routing Process 1 with ID: 1.1.1.3 VRF default
-----------------------------------------------

Graceful-restart is configured
Restart Interval: 120, State: inactive
Last Graceful Restart Exit Status: none
Maximum Paths to Destination: 4
Number of external LSAs 0, checksum sum 0
Number of areas is: 2, 2 normal, 0 stub
Number of active areas is: 2, 2 normal, 0 stub
Area (0.0.0.0) (Active)
  Interfaces in this Area: 1 Active Interfaces: 1
  Passive Interfaces: 0 Loopback Interfaces: 0
  SPF calculation has run 4 times
  Number of LSAs: 5, checksum sum 99122
Area (0.0.0.1) (Active)
  Interfaces in this Area: 1 Active Interfaces: 1
  Passive Interfaces: 0 Loopback Interfaces: 0
  SPF calculation has run 4 times
  Number of LSAs: 4, checksum sum 130630