inter-switch-link hold-time

Syntax

inter-switch-link hold-time <HOLD-INTERVAL>
no inter-switch-link hold-time

Description

Sets the holdtime for the interswitch link protocol. A port is treated as down only when it stays down for the configured holdtime interval. The default holdtime is 0 seconds.

The no form of this command sets the interswitch link protocol holdtime to the default of 0 seconds.

NOTE:

This inter-switch-link hold-time command replaces the mclag inter-switch-link hold-time <HOLD-INTERVAL> command that is supported only in 10.00 releases.

Command context

config-vsx

Parameters

<HOLD-INTERVAL>

Specifies the hold interval in seconds. Required. Range: 0 to 3 seconds.

Authority

Administrators

Examples

Setting the holdtime for interswitch link protocol to 2 seconds:

switch(config)# vsx
switch(config-vsx)# inter-switch-link hold-time 2

Setting the interswitch link protocol holdtime to the default of 0 seconds:

switch(config)# vsx
switch(config-vsx)# no inter-switch-link hold-time