show ip mroute

Syntax

show ip mroute [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows multicast routing information. Optionally, you can show specific information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows mroute information for all VRFs. Optional.

vrf <VRF-NAME>

Shows mroute information for a particular VRF. If the <VRF-NAME> is not specified, it shows information for the default VRF. Optional.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing IP mroute:

switch# show ip mroute  all-vrfs
VRF : blue
Total number of entries : 1

Group Address           : 200.200.200.200
Source Address          : 40.0.0.5
Incoming interface      : vlan3
Outgoing Interface List:
Interface   State
---------   -----
vlan2       forwarding

VRF : green
Total number of entries : 2

Group Address           : 100.1.1.12
Source Address          : 40.0.0.4
Neighbor                : 10.1.1.1
Incoming interface      : vlan2
Outgoing Interface List:
Interface   State
---------   -----
vlan5       forwarding

Group Address           : 200.200.200.200
Source Address          : 40.0.0.5
Neighbor                : 10.1.1.2
Incoming interface      : vlan1
Outgoing Interface List:
Interface   State
---------   -----
vlan6       forwarding

VRF : default
Total number of entries : 1

Group Address           : 10.1.1.14
Source Address          : 40.0.0.6
Neighbor                : 10.1.1.2
Incoming interface      : 1/1/5
Outgoing Interface List:
Interface   State
---------   -----
1/1/3       forwarding
1/1/1       pruned