show ip pim interface <INTERFACE-NAME>

Syntax

show ip pim interface <INTERFACE-NAME> [vsx-peer]

Description

Shows detailed information about the PIM interface currently configured.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE-NAME>

Specifies an interface for showing PIM interface information. Interface can also be a LAG or VLAN.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing PIM interface information for interface 1/1/2:

switch# show ip pim interface 1/1/2

PIM Interfaces

VRF: default

Interface  : 1/1/2
IP Address : 50.0.0.4/24
Mode       : sparse

Designated Router :
Hello Interval (sec)  : 30
Hello Delay (sec)     : 5

Override Interval (msec)  : 2500              Lan Prune Delay     : Yes
Propagation Delay (msec)  : 500               DR Priority         : 1
Neighbor Timeout          : 105