ipv6 nd ra reachable-time

Syntax

ipv6 nd ra reachable-time <TIME>

no ipv6 nd ra reachable-time [<TIME>]

Description

Sets the amount of time that the interface considers a device to be reachable after receiving a reachability confirmation from the device.

The no form of this command sets the reachable time to the default value of 0. (no limit).

Command context

config-if

Parameters

<TIME>

Specifies the reachable time in milliseconds. Range: 1000-3600000. Default: 0 (no limit).

Authority

Administrators

Examples

switch(config)# interface 1/1/1
switch(config-if)# ipv6 nd ra reachable-time 2000