show interface dom

Syntax

show interface [<INTERFACE-NAME>] dom [detail] [vsx-peer]

Description

Shows diagnostics information and alarm/warning flags for the optical transceivers (SFP, SFP+, QSFP+). This information is known as DOM (Digital Optical Monitoring). DOM information also consists of vendor determined thresholds which trigger high/low alarms and warning flags.

Command context

Manager (#)

Parameters

<INTERFACE-NAME>

Specifies the name of the interface on the switch. Some switches (such as the Aruba 8400 Switch Series), use the format member/slot/port (for example, 1/1/1). Other switches, use slot/port (for example, 1/1).

detail

Show detailed information.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

switch# show interface dom

----------------------------------------------------------------------------------
Port    Type      Channel  Temperature Voltage  Tx Bias  Rx Power      Tx Power
                           (Celsius)   (Volts)  (mA)     (mW/dBm)      (mW/dBm)
----------------------------------------------------------------------------------
1/1/1   SFP+SR             47.65       3.31     8.40     0.08, -10.96  0.63, -2.49
1/1/2   SFP+SR             n/a         n/a      n/a      n/a           n/a
1/1/3   SFP+DA3            42.10       3.24     n/a      n/a           n/a
1/1/4   QSFP+SR4  1        44.46       3.30     6.12     0.08, -10.96  0.63, -1.95
                  2        44.46       3.30     6.04     0.08, -10.96  0.63, -2.00
                  3        44.46       3.30     6.51     0.08, -10.96  0.60, -2.16
                  4        44.46       3.30     6.19     0.08, -10.96  0.63, -1.94