show lacp aggregates

Syntax

show lacp aggregates [<LAG-NAME>] [vsx-peer]

Description

Displays all LACP aggregate information configured for all LAGs, or for a specific LAG.

Command context

Operator (>) or Manager (#)

Parameters

<LAG-NAME>

Optional: Specifies a lag name.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Displaying LACP aggregate information configured for lag10:

switch# show lacp aggregates lag10

Aggregate-name        : lag10
Aggregated-interfaces : 1/1/2 1/1/1
Heartbeat rate        : slow
Aggregate mode        : active

Displaying LACP aggregates:

switch# show lacp aggregates

Aggregate-name        : lag1
Aggregated-interfaces : 1/1/29 1/1/28 1/1/27
Heartbeat rate        : slow
Hash                  : l3-src-dst
Aggregate mode        : active


Aggregate-name        : lag2
Aggregated-interfaces : 1/1/48
Heartbeat rate        : slow
Hash                  : l2-src-dst
Aggregate mode        : passive