description

Syntax

description <TEXT>

no description <TEXT>

Description

Provides a brief description of the LAG interface. The description text is saved in the configuration of the LAG. It is available even after a reboot.

The no form of this command removes the description of the LAG interface from the configuration.

Command context

config-lag-if

Parameters

<TEXT>

Specifies the description of the LAG interface.

Authority

Administrators

Example

switch(config)# interface lag 10
switch(config-lag-if)# description This LAG is used for an example.
switch(config-lag-if)# do show run
...
vlan 1
interface lag 10
     description This LAG is used for an example.
interface lag 60
switch(config-lag-if)#