Enabling MOE
Procedure
Use the CLI command to enable MOE for IPv4 multicast traffic. The
running-config
file displays the MOE enabled for IPv4 traffic.
Syntax
fabric-offload multicast ipv4 route {enable|disable}
Description
Enable or disable multicast offload engine for routed multicast IPv4 traffic.
Usage
fabric-offload multicast ipv4 route {enable|disable}
Example output
(Prev-mode)switch# show running-config
Running configuration:
; J9851A Configuration Editor; Created on release #KB.xx.xx.0000x
; Ver #0a:19.f4.7b.ff.ff.fc.ff.ff.3f.ef:b0
hostname "Switch"
module A type j9992a
module L type j9987a
fabric-offload multicast ipv4 route enable
ip routing
ip multicast-routing
snmp-server community "public" unrestricted
oobm
ip address dhcp-bootp
exit
vlan 1
name "DEFAULT_VLAN"
untagged A1-A21,L1-L24
ip address dhcp-bootp
exit
no allow-v2-modules
preview-mode