Banner operating notes
The default banner appears only when the switch is in the factory default configuration. Using the command
no banner motd
deletes the currently configured banner text and blocks display of the default banner. The default banner is restored only if the switch is reset to its factory default configuration.The switch supports one banner at any time. Configuring a new banner replaces any former banner configured on the switch.
If the switch is configured with
ssh version 1
orssh version 1-or-2
, configuring the banner sets the SSH configuration tossh version 2
and displays the messageWarning: SSH version has been set to v2.
If a banner is configured, the switch does not allow configuration with
ssh version 1
orssh version 1-or-2
. Attempting to do so produces the error messageBanner has to be disabled first.
.If a banner is enabled on the switch, the WebAgent displays
Notice to all users
on the banner page.