Viewing system software image information for both management modules
The
show version
command displays system software image information for both management modules, as well as which module is the active management module and which is the standby management module. The Boot Image field displays which flash image last booted from, even if the
boot set-default
command has been set to change the flash booted from on the next boot. The output of the
show version
command when redundancy is enabled is shown in
Figure 192: show version
command when redundancy is enabled .
Example
When redundancy is disabled, the output of the
show version
command changes, as shown in
Figure 193: show version
command when redundancy is disabled .
Example